Our top seller products
Variant available
5 x in stock
1 x in stock
Variant available
1 x in stock
No results were found for the filter!
1 x in stock
3-jaw special chuck / lathe chuck Ø 400 - 800 mm, with extra large Through Hole for pipe preparation on lathes, rotary tables and welding fixtures.
From €1,553.55
*
approx. 1-3 workdays
1 x in stock
ZENTRA two-jaw chuck DIN 6350 made of cast iron Ø 160 - 400 mm, for holding polygonal and shaped turned parts as turning machine accessories.
From €267.63
*
approx. 1-3 workdays
Variant available
ZENTRA three-jaw chucks DIN 6350, Ø 80 - 800 mm, with one-piece or split jaws, cast iron or steel for clamping force and concentricity.
From €195.76
*
approx. 10 weeks
5 x in stock
ZENTRA four-jaw chuck DIN 6350 optionally Ø 100 - 800 mm in cast iron or steel, guarantees uniform clamping force and high concentricity.
From €230.03
*
approx. 1-3 workdays
2 x in stock
ZENTRA three-jaw chuck with radial fine adjustment Ø 125 - 400 mm made of steel, adjusting accuracy within 0.005 mm and repeatability 0.015 mm.
From €456.25
*
approx. 1-3 workdays
Variant available
ZENTRA three-jaw chucks DIN 55026 made of steel Ø 160 - 400 mm, guarantee uniform clamping force and high concentricity.
From €551.92
*
approx. 10 weeks
4 x in stock
ZENTRA three-jaw chuck Camlock DIN 55029 steel Ø 125 - 400 mm, with one-piece or split jaws for high clamping force and concentricity.
From €490.88
*
approx. 1-3 workdays
1 x in stock
ZENTRA three-jaw chuck DIN 55027 steel Ø 125 - 400 mm optionally with one-piece or split jaws for high clamping force and concentricity.
From €447.56
*
approx. 1-3 workdays
Variant available
ZENTRA four-jaw chuck DIN 55027 in steel guarantee uniform clamping force due to centrically clamping jaws and high concentricity.
From €602.85
*
approx. 10 weeks
2 x in stock
ZENTRA 4-jaw chuck DIN 55029 in steel guarantee uniform clamping force due to centrically clamping jaws and high concentricity.
From €602.85
*
approx. 1-3 workdays
10 x in stock
ZENTRA six-jaw chuck, steel Ø 125 - 400 mm with radial fine adjustment, high concentricity for thin-walled tubes and soft materials.
From €569.77
*
approx. 1-3 workdays
4 x in stock
Zentra Wescott combined lathe chuck, cylindrical holder, Ø 160 - 325 mm, with 3 or 4 adjustable swivel jaws, for irregularly shaped workpieces.
From €952.00
*
approx. 1-3 workdays
