Our top seller products
2 x in stock
1 x in stock
1 x in stock
Variant available
6 x in stock
No results were found for the filter!
1 x in stock
Hand reamer H7, HSS, DIN 206, from Ø 3.0 mm - 50.0 mm, form A - straight fluted with long conical point for reaming through holes.
From €8.51
*
approx. 1-3 workdays
3 x in stock
Hand reamer H7, HSS, DIN 206, from Ø 3,0 mm - 50,0 mm, form B - spiral fluted with long conical point, for reaming through holes.
From €9.08
*
approx. 1-3 workdays
Variant available
Taper reamers 1:50, DIN 9 Form A, HSS, Ø 3 - 50 mm, as pin hole reamer with cylindrical shank and square for reaming conical bores.
From €17.16
*
approx. 10 weeks
1 x in stock
Taper reamers 1:50, DIN 9 Form B, HSS, Ø 4 - 50 mm, as pin hole reamer for reaming conical bores with cylindrical shank and square.
From €20.48
*
approx. 1-3 workdays
1 x in stock
Machine reamer H7 DIN 212, form A/C, type HSS, with straight shank, for fine machining of bores & Improvement of surface finish.
From €7.35
*
approx. 1-3 workdays
1 x in stock
Machine reamer H7 DIN 212, form A/C, material HSS-E, with cylindrical shank, for fine machining of bores & Improvement of surface finish.
From €8.51
*
approx. 1-3 workdays
6 x in stock
Machine reamer H7 DIN 212, with cylindrical shank, form B/D, HSS, spiral fluted for fine machining of bores and improvement of surface finish.
From €8.51
*
approx. 1-3 workdays
1 x in stock
Machine reamer H7 DIN 212, with cylindrical shank, form B/D, in HSS-E, spiral fluted for fine machining of bores and improvement of surface finish.
From €9.76
*
approx. 1-3 workdays
Variant available
Machine reamer H7 Ø 5 - 50 mm DIN 208 Form A, with MK shank, straight fluted, for fine machining and improvement of surface finish.
From €16.29
*
approx. 10 weeks
Variant available
Machine reamer H7 DIN 208 Form B, Ø 5 - 50 mm with MK shank, spiral fluted, for fine machining and improvement of surface finish.
From €16.29
*
approx. 10 weeks
Variant available
HSS shell reamer DIN 219 form A straight fluted, reamer H7 has a bore with taper 1:30 for fitting on the suitable holder DIN 217.
From €45.14
*
approx. 10 weeks
2 x in stock
HSS shell reamer DIN 219 form B twist fluted, the reamer H7 has a bore with taper 1:30 for fitting on the suitable holder DIN 217.
From €48.08
*
approx. 1-3 workdays
Variant available
Bridge reamer DIN 311, HSS with MK shank spiral fluted with short 45° cut, for fine machining and surface finishing.
From €25.81
*
approx. 10 weeks
