Technical competent advice
Secure purchase on account
Already over 10.000 satisfied customers
Dispatch within 24h*
 

Clamping heads for single and double spindle lathes

Clamping heads

Clamping heads for single and double spindle lathes, are suitable for axial draw back chucking system Ortlieb Spannax / Hainbuch. Spanntop in the following versions: with or without stem, Rubber Flex® with smooth bore and front edge as well as the suitable turning fixture and changing device - manually or pneumatic.

Clamping heads for single and double spindle lathes, are suitable for axial draw back chucking system Ortlieb Spannax / Hainbuch. Spanntop in the following versions: with or without stem, Rubber... read more »
Close window
Clamping heads for single and double spindle lathes

Clamping heads for single and double spindle lathes, are suitable for axial draw back chucking system Ortlieb Spannax / Hainbuch. Spanntop in the following versions: with or without stem, Rubber Flex® with smooth bore and front edge as well as the suitable turning fixture and changing device - manually or pneumatic.

1
No results were found for the filter!
10 x in stock
Turning fixtures for clamping head
Turning fixtures for clamping head
Turning fixtures for expansion chuck SK 32, 42, 52, 65, 80, 100 are used to modify the diameter and shape of the clamping bore on expansion chucks.
From €100.75 *

approx. 1-3 workdays

Variant selection
Variant available
Clamping head SK 100 round, swivel out without stem
Clamping head SK 100 round, swivel out without stem
Hainbuch expansion chuck SK 100 with pilot bore and soft face for self-boring without stem, suitable for axial tension clamping system Ortlieb Spannax
€567.87 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 100 round, smooth without stem
Clamping head SK 100 round, smooth without stem
Hainbuch clamping head SK 100 with smooth clamping bore Ø15-100mm without stem, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€476.24 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 100 round, grooved lengthwise and crosswise without stem
Clamping head SK 100 round, grooved lengthwise and crosswise without stem
Hainbuch clamping head SK 100 L59 with longitudinal and transverse grooved clamping bore Ø25-100mm fitting axial tension clamping system Hainbuch Spanntop.
€476.24 *

approx. 10 weeks

Variant selection
1 x in stock
Changing device for clamping head, manual
Changing device for clamping head, manual
Manual changing device for clamping head sizes 32, 42, 52, 65, 80, suitable for axial tension clamping system Ortlieb Spannax / Hainbuch Spanntop.
From €407.84 *

approx. 1-3 workdays

Variant selection
Variant available
Clamping head SK 32 round, swivel out without stem
Clamping head SK 32 round, swivel out without stem
Clamping head SK 32 round, can be turned out without a stem with clamping bore Ø 5 | 10 | 20 mm, suitable for axial draw cup chucks Spannax.
€168.98 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 32 round, smooth without stem
Clamping head SK 32 round, smooth without stem
Clamping head SK 32 with smooth clamping bore Ø 4-32 mm without stem, suitable for Ortlieb Spannax / Hainbuch Spanntop.
€130.31 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 32 round, grooved length and cross without stem
Clamping head SK 32 round, grooved length and cross without stem
Clamping head SK 32, longitudinal + transverse grooved bore Ø11-32mm without stem fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop
€130.31 *

approx. 10 weeks

Variant selection
Variant available
Expansion chuck SK 32 round, cross grooved without stem
Expansion chuck SK 32 round, cross grooved without stem
Clamping head SK 32 with cross-grooved clamping bore Ø 8-10 mm without stem, suitable for Ortlieb Spannax / Hainbuch Spanntop.
€130.31 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 32 hexagonal, smooth without stem
Clamping head SK 32 hexagonal, smooth without stem
Clamping head SK 32 hexagonal, with smooth clamping bore without stem, suitable for Ortlieb Spannax / Hainbuch Spanntop.
From €163.63 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 32 hexagon, cross grooved without stem
Clamping head SK 32 hexagon, cross grooved without stem
Clamping head SK 32 transversely grooved bore hexagonal 8-27mm without stem, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€168.98 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 32 square, smooth without stem
Clamping head SK 32 square, smooth without stem
Clamping head SK 32 with smooth clamping bore square 7-22mm, fitting axial pull clamping system Ortlieb Spannax/Hainbuch Spanntop for finished material.
€168.98 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 32 square, cross grooved without stem
Clamping head SK 32 square, cross grooved without stem
Clamping head SK 32 transversely grooved bore square 8-22mm without stem, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€168.98 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 round, swivel out without stem
Clamping head SK 42 round, swivel out without stem
Clamping head SK 42 round, with soft face, without stem Ø 5 | 15 | 30 mm with soft face for self-boring, suitable for axial pull clamping system.
€197.54 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 round, smooth without stem
Clamping head SK 42 round, smooth without stem
Clamping head SK 42 with smooth clamping bore Ø 3-42 mm without stem, suitable for Ortlieb Spannax / Hainbuch Spanntop.
€139.23 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 round, smooth with stem
Clamping head SK 42 round, smooth with stem
Clamping head SK 42 with smooth clamping bore Ø 3-7,5 mm and stem L47, suitable for axial pull clamping system Ortlieb Spannax / Hainbuch Spanntop.
€139.23 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 round, grooved lengthwise and crosswise with stem
Clamping head SK 42 round, grooved lengthwise and crosswise with stem
Clamping head SK 42 longitudinal and transverse grooved bore Ø12-42mm and stem, for axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€139.23 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 round, cross grooved with stem
Clamping head SK 42 round, cross grooved with stem
Hainbuch expansion chuck SK 32 cross grooved clamping bore Ø8-11mm and stem L47, fitting axial pull clamping system Ortlieb Spannax/Hainbuch Spanntop.
€139.23 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 hexagonal, smooth without stem
Clamping head SK 42 hexagonal, smooth without stem
Clamping head SK 42 with smooth clamping bore hexagonal 7 mm without stem, suitable for axial pull clamping system Ortlieb Spannax / Hainbuch Spanntop.
€193.97 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 hexagon, smooth with stem
Clamping head SK 42 hexagon, smooth with stem
Clamping head SK 42 smooth clamping bore hexagonal 7 mm and stem L47, fiting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€193.97 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 hexagon, cross grooved with stem
Clamping head SK 42 hexagon, cross grooved with stem
Clamping head SK 42 transversely grooved bore hexagonal 8-38mm and stem L47, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€193.97 *

approx. 10 weeks

Variant selection
8 x in stock
Clamping head SK 42 square, smooth without stem
Clamping head SK 42 square, smooth without stem
Clamping head SK 42 smooth bore square 7 mm without stem, for finished material, for axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€193.97 *

approx. 1-3 workdays

Variant selection
Variant available
Clamping head SK 42 square, smooth with stem
Clamping head SK 42 square, smooth with stem
Clamping head SK 42 with smooth clamping bore square 7 mm and stem L47, suitable for axial tension clamping system Ortlieb Spannax / Hainbuch Spanntop.
€193.97 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 42 square, cross grooved with stem
Clamping head SK 42 square, cross grooved with stem
Clamping head SK 32 transversely grooved bore square 7 mm and stem L47, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€193.97 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 52 round, swivel out without stem
Clamping head SK 52 round, swivel out without stem
Clamping head SK 52 round, with soft face, without stem Ø 5 | 15 | 30 mm with soft face, for axial tension clamping system Ortlieb Spannax.
€166.60 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 52 round, smooth without stem
Clamping head SK 52 round, smooth without stem
Clamping head SK 52 with smooth clamping bore Ø 3-52 mm without stem, suitable for Ortlieb Spannax / Hainbuch Spanntop.
€130.31 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 52 round, grooved lengthwise and crosswise without stem
Clamping head SK 52 round, grooved lengthwise and crosswise without stem
Clamping head SK 52 longitudinally and transversely grooved bore Ø11-52mm, fitting Ortlieb Spannax/Hainbuch Spanntop axial tension clamping system.
€130.31 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 52 hexagonal, smooth without stem
Clamping head SK 52 hexagonal, smooth without stem
Clamping head SK 52 smooth clamping bore hexagonal 7-45mm without stem, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€168.98 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 52 hexagon, cross grooved without stem
Clamping head SK 52 hexagon, cross grooved without stem
Clamping head SK 52 transversely grooved bore hexagonal 8-45mm without stem, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€168.98 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 52 square, smooth without stem
Clamping head SK 52 square, smooth without stem
Clamping head SK 52 with smooth clamping bore square 7-36 mm without stem, suitable for axial tension clamping system Ortlieb Spannax / Hainbuch Spanntop.
€168.98 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 52 square, cross grooved without stem
Clamping head SK 52 square, cross grooved without stem
Clamping head SK 52 transversely grooved bore square 8-36mm without stem, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€168.98 *

approx. 10 weeks

Variant selection
1 x in stock
Clamping head SK 65 round, swivel out without stem
Clamping head SK 65 round, swivel out without stem
Chuck SK 65 without stem with clamping bore Ø 5 | 10 | 20 | 40 mm with soft face for self-boring, suitable for axial pulling chucks.
€214.20 *

approx. 1-3 workdays

Variant selection
6 x in stock
Clamping head SK 65 round, smooth without stem
Clamping head SK 65 round, smooth without stem
Clamping head SK 65 with smooth clamping bore Ø 4-65 mm without stem, suitable for Ortlieb Spannax / Hainbuch Spanntop.
€173.74 *

approx. 1-3 workdays

Variant selection
1 x in stock
Clamping head SK 65 round, smooth with stem
Clamping head SK 65 round, smooth with stem
Clamping head SK 65 with smooth clamping bore Ø 4-7,5 mm and stem L58, suitable for axial pull clamping system Ortlieb Spannax / Hainbuch Spanntop.
€173.74 *

approx. 1-3 workdays

Variant selection
Variant available
Clamping head SK 65 round, grooved lengthwise and crosswise with stem
Clamping head SK 65 round, grooved lengthwise and crosswise with stem
Clamping head SK 65 longitudinal and transverse grooved bore Ø11-65mm and stem L58, for axial tension clamping system Hainbuch Spanntop/Ortlieb Spannax.
€167.79 *

approx. 10 weeks

Variant selection
1 x in stock
Expansion chuck SK 65 round, cross grooved with stem
Expansion chuck SK 65 round, cross grooved with stem
Hainbuch clamping head SK 32 cross grooved clamping bore Ø8-10,5mm and stem L58, for Ortlieb Spannax/Hainbuch Spanntop axial tension clamping system.
€167.79 *

approx. 1-3 workdays

Variant selection
9 x in stock
Clamping head SK 65 hexagonal, smooth without stem
Clamping head SK 65 hexagonal, smooth without stem
Clamping head SK 65 hexagonal 7-56 mm with smooth clamping bore, suitable for Ortlieb Spannax / Hainbuch Spanntop.
€201.71 *

approx. 1-3 workdays

Variant selection
1 x in stock
Clamping head SK 65 hexagonal, smooth with stem
Clamping head SK 65 hexagonal, smooth with stem
Hainbuch clamping head SK 65 smooth clamping bore hexagon 7mm and stem L58, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€201.71 *

approx. 1-3 workdays

See details
1 x in stock
Clamping head SK 65 hexagon, cross grooved with stem
Clamping head SK 65 hexagon, cross grooved with stem
Hainbuch expansion chuck SK 65 cross grooved clamping bore hex 8-56mm and stem, for axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€201.71 *

approx. 1-3 workdays

Variant selection
Variant available
Clamping head SK 65 square, smooth without stem
Clamping head SK 65 square, smooth without stem
Hainbuch clamping head SK 65 smooth clamping bore square 7-46 mm without stem, fitting axial pull clamping system Ortlieb Spannax/Hainbuch Spanntop.
€201.70 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 65 square, smooth with stem
Clamping head SK 65 square, smooth with stem
Hainbuch expansion chuck SK 65 smooth square clamping bore 7 or 8 mm with stem, for axial tension clamping system Hainbuch Spanntop/Ortlieb Spannax.
€201.71 *

approx. 10 weeks

Variant selection
1 x in stock
Clamping head SK 65 square, cross grooved with stem
Clamping head SK 65 square, cross grooved with stem
Clamping head SK 65 transversely grooved clamping bore square 8-46 mm and stem, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€201.71 *

approx. 1-3 workdays

Variant selection
Variant available
Clamping head SK 80 round, swivel out without stem
Clamping head SK 80 round, swivel out without stem
Clamping head SK 80 round with soft front side without stem, clamping bore Ø 8 | 20 | 40 | 60 mm for self-boring for Ortlieb Spannax / Hainbuch Spanntop.
€321.30 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 80 round, smooth without stem
Clamping head SK 80 round, smooth without stem
Hainbuch clamping head SK 80 with smooth clamping bore Ø5-80 mm without stem, for axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€279.65 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 80 round, grooved lengthwise and crosswise without stem
Clamping head SK 80 round, grooved lengthwise and crosswise without stem
Hainbuch expansion chuck SK 80, grooved length and cross Ø11-80mm, without stem, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€279.65 *

approx. 10 weeks

Variant selection
Variant available
Expansion chuck SK 80 round, cross grooved without stem
Expansion chuck SK 80 round, cross grooved without stem
Hainbuch expansion chuck SK 80 with cross grooved clamping bore Ø 8 | 9 | 10 mm, fitting axial tension clamping system Ortlieb Spannax/Hainbuch Spanntop.
€279.65 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 80 hexagonal, smooth without stem
Clamping head SK 80 hexagonal, smooth without stem
Hainbuch clamping head SK 80 with smooth bore hexagonal 7-68mm without stem, fitting axial pull clamping system Ortlieb Spannax/Hainbuch Spanntop.
€320.11 *

approx. 10 weeks

Variant selection
Variant available
Clamping head SK 80 hexagon, cross grooved without stem
Clamping head SK 80 hexagon, cross grooved without stem
Hainbuch clamping head SK 80, cross grooved bore hexagonal 8-68mm without stem, fitting axial pull clamping system Ortlieb Spannax/Hainbuch Spanntop.
€320.11 *

approx. 10 weeks

Variant selection
1
Viewed
Do you have any questions?

Do you have any questions about our collets and precision tools?

You can contact us by telephone, via fax or email.
Tel.: +49 6721 994167
Fax: +49 6721 994169
eMail: first-connect@fwt-gmbh.de