Our top seller products
13 x in stock
Variant available
22 x in stock
Variant available
Content
2 piece
(€13.47 * / 1 piece)
From €26.94
*
1 x in stock
No results were found for the filter!
Variant available
Granit plates, made of dark granit, type 518, accuracy DIN 876/0, dimensions 300 x 300 x 50 - 1,200 x 800 x 150 mm.
From €120.31
*
approx. 10 weeks
Variant available
Stand for granit plates, solid welded, type U518, with adjustable screws, for size 630 x 400 x 100 - 1,200 x 800 x 150 mm.
From €333.20
*
approx. 10 weeks
Variant available
Granit plate with thread hole M8, type 519, in 4 dimensions 150 x 150 x 40 | 300 x 200 x 50 | 400 x 250 x 50 | 400 x 400 x 50 mm.
From €51.65
*
approx. 10 weeks
4 x in stock
Cast iron plates, type 520, accuracy DIN 876/3, seraped, dimensions up 200 x 200 to 1,000 x 1,000 mm.
From €148.27
*
approx. 1-3 workdays
Variant available
Stand for cast iron plates, type 529, welded, with adjustable screws, for size up 400 x 400 to 1,000 x 1,000 mm.
From €333.20
*
approx. 10 weeks
100+ in stock
diamant dressing paste 225g blue for surface control, evenness of colour-coat shows the quality of machining,
Content
225 gram
(€9.36 * / 100 gram)
€21.06
*
approx. 1-3 workdays
78 x in stock
diamant marking fluid spray 400 ml in blue or red, in blue or red, for marks on metal surfaces.
€21.30
*
approx. 1-3 workdays
16 x in stock
diamant wax for granit plates W4 polymer wax for cleaning
of granit plates
From €17.85
*
approx. 1-3 workdays
20 x in stock
Double V-blocks DIN 876/0, type 541, with clamp, in 4 sizes, made of special steel, hardened and pairwise finished.
Content
2 piece
(€35.41 * / 1 piece)
From €70.81
*
approx. 1-3 workdays
22 x in stock
Magnetic V-blocks, accuracy 0.01 mm, type 540/5, 100 x 70 x 95 mm, magnetic force 100 kg, for shaft Ø 6 - 66 mm, hardened.
€104.13
*
approx. 1-3 workdays
24 x in stock
V-blocks DIN 876/0, hardened, type 546, in 3 sizes, made of special steel, pairwise machined, accuracy 0.008 mm.
From €74.97
*
approx. 1-3 workdays
17 x in stock
Magnetic V-block pair, accuracy 0.005 mm, type 542, hardened, 80 x 67 x 96 mm or 100 x 70 x 96 mm, Magnetic force 100 | 120 kg.
From €649.74
*
approx. 1-3 workdays
1 x in stock
Triple V-Blocks, hardened, type 548, 3 x grooves angle every 90°, made of special steel and pairwise machined, accuracy 0.01 mm.
From €74.97
*
approx. 1-3 workdays
41 x in stock
Double V-blocks DIN 876/1, type 544, with clamp, in 2 sizes, made of special steel, hardened and and ground in matched pairs.
Content
2 piece
(€33.32 * / 1 piece)
From €66.64
*
approx. 1-3 workdays
32 x in stock
Magnetic V-block, special steel, DIN 876/1, type 569, accuracy 0.01 mm, single or pairwise groud, magnetic nominal force 100 kg.
From €111.98
*
approx. 1-3 workdays
2 x in stock
Bench center with tailstock S24, measuring range 500 | 1000 mm, height of center point 176 mm, column Ø 12 x 176 mm.
From €1,291.15
*
approx. 1-3 workdays
18 x in stock
Precision dial bench stand with dial support, type S22/1, with round table Ø 50 mm, surface, hardened, ground and lapped, measuring range 100 mm.
€156.60
*
approx. 1-3 workdays
2 x in stock
Precision dial bench stand with dial support, type S35/1, with square table surface, hardened, ground and lapped, measuring range 100 / 150 mm.
From €191.59
*
approx. 1-3 workdays
3 x in stock
Precision dial bench stand with granit plate degree 0, type S39/1, with measuring arm Ø 20 x 255 mm, measuring range 160 mm.
€824.67
*
approx. 1-3 workdays
Subsequent delivery
Precision dial bench gauges with granit plate degree 0, type S39/2, with measuring arm Ø 18 x 190 mm, measuring range 150 mm.
€212.42
*
approx. 10 weeks
5 x in stock
Precision dial bench gauges with granit plate degree 0, type S39/3, overhang 120 mm, measuring range 200 mm.
€162.44
*
approx. 1-3 workdays
Subsequent delivery
Precision dial bench gauges with granit plate degree 0, type S37, with threaded spindle, overhang 120 mm, measuring range 200 mm.
€270.73
*
approx. 10 weeks
100+ in stock
Dial support or column for granite plate with threaded pin for granite plate with fine adjustment for dial gauge, mounting M8 - M10.
From €10.95
*
approx. 1-3 workdays
Variant available
V-block pairs made of hardened special steel, without clamps, for clamping round material, prismatic incision 90°, supplied in pairs
Content
2 piece
(€13.47 * / 1 piece)
From €26.94
*
approx. 10 weeks
7 x in stock
1 pair of prismatic blocks with clamping bracket suitable for clamping round material, prismatic cut 90°, made of hardened steel, supplied in pairs.
Content
2 piece
(€24.46 * / 1 piece)
From €48.91
*
approx. 1-3 workdays
13 x in stock
FWT precision tool maker vice without spindle, PPH-A with pull-down function, hardened HRc 58-62 and precision ground, can be used on 4 sides.
From €43.32
*
approx. 1-3 workdays
Variant available
Precision toolmaker vice with spindle, PPH-B, hardened and precision-ground for grinding and inspection work, can be used on 4 sides.
From €130.54
*
approx. 10 weeks
