Our top seller products
13 x in stock
3 x in stock
6 x in stock
1 x in stock
6 x in stock
No results were found for the filter!
4 x in stock
Precision rotary table tiltable type UT300, precision rotary table can be used horizontally and vertically, for milling, drilling, grinding and marking work.
€2,530.77
*
approx. 1-3 workdays
1 x in stock
Vertex swivel angle plate adjustable ± 45° in both directions, type VP, with reinforced construction made of special cast iron.
From €342.24
*
approx. 1-3 workdays
7 x in stock
Pair of V-blocks without clamping bracket, suitable for clamping round material, prismatic V-groove 90°, made of special cast iron, delivered in pairs
Content
2 piece
(€10.36 * / 1 piece)
From €20.71
*
approx. 1-3 workdays
3 x in stock
1 pair of magnetic V-blocks, switchable for clamping round material, prismatic V-groove90°, made of hardened steel, delivered in pairs.
Content
2 piece
(€62.30 * / 1 piece)
From €124.59
*
approx. 1-3 workdays
2 x in stock
Heavy-duty tilding plate 0 - 90°, series VUT with hand crank, reinforced construction made of special cast iron for clamping of fixtures, vices and lathe chucks.
From €1,370.52
*
approx. 1-3 workdays
Variant available
Angle prism WPE, adjustable from -30° to +60°, for measurements or for metal working, V-groove 90°, high carbon steel, 58 - 64 HRC.
From €69.50
*
approx. 10 weeks
6 x in stock
Angle prism fine adjustable with worm gear from 0 to -30°/0 to +60°, V-groove 90°, special steel HRC 50-54, squareness: ± 0,01 mm.
From €158.87
*
approx. 1-3 workdays
Variant available
Semi Universal Dividing Head, HOMGE type BS, including tailstock, flange and 3 dividing discs, for direct and indirect dividing.
From €708.05
*
approx. 10 weeks
Subsequent delivery
Universal dividing head, HOMGE, type BS-2, incl. tailstock, flange and 3 dividing discs, as milling machine accessories for direct and indirect dividing.
€1,486.31
*
approx. 10 weeks
13 x in stock
Collet holder type 266 for 5C Collets the collet holder can be used horizontally and vertically, for fast clamping of the pulling collet.
€68.78
*
approx. 1-3 workdays
6 x in stock
Collet holder, 2-piece for 5C collets type 268, high quality, for fast clamping and dividing of workpieces without dividing head.
€86.39
*
approx. 1-3 workdays
Variant available
Homge Dividing Plates for Rotary Table consists of 3 indexing plates ( A,B,C ) and is required for indirect dividing.
From €147.56
*
approx. 10 weeks
Variant available
Clamping tables, swivelling ±45 degrees in both directions, with rotating plate rotatable through 360°, type HAP, with reinforced construction in special cast iron.
From €510.51
*
approx. 10 weeks
Variant available
Precision rotary tables HOMGE type HHV, universal dividing head for milling, drilling, boring, grinding and marking work, for horizontal and vertical use.
From €415.31
*
approx. 10 weeks
Subsequent delivery
Manual valve for Chandox pneumatic-hydraulic 2 and 3 jaws vice type MO and MOT with pneumatic control.
€109.84
*
approx. 10 weeks
Variant available
3 jaw hollow power chuck MO hydraulic as stationary, centric clamping vise chuck, suitable for series production, can also be used as 5-axis chuck.
From €1,902.81
*
approx. 10 weeks
Variant available
2 jaw pneumatic-hydraulic power chuck as stationary, centric clamping vice MOT-04, Ø 115 mm, suitable for series production, can also be used as 5-axis clamp.
From €2,094.52
*
approx. 10 weeks
Variant available
Chandox 3-jaw chuck SE, stationary three-jaw chuck, flat design, designed for use on measuring machines or light machining.
From €498.61
*
approx. 10 weeks
Variant available
Tailstock for rotary tables and dividing heads Homge, height adjustable, can be used for accurate centering in vertical position.
From €153.51
*
approx. 10 weeks
5 x in stock
3-jaw chuck, type VSR with 360 degree scale, for milling and drilling machines, easy handling and fastening with screws.
From €392.82
*
approx. 1-3 workdays
1 x in stock
4 jaw chuck VSR with 360 degree scale, for milling and drilling machines, easy handling and fastening with screws.
From €449.46
*
approx. 1-3 workdays
3 x in stock
ZENTRA Adaptor plates for rotary tables for positioning of lathe chucks and other chucks on the rotary table.
From €85.44
*
approx. 1-3 workdays
8 x in stock
ZENTRA Semi universal dividing head ZENTRA, type HUT, with indexing plate with 24 holes for direct dividing, including tailstock, flange and 2 dividing plates.
From €494.56
*
approx. 1-3 workdays
1 x in stock
Clamping table swivel 30 degrees, Swivel and tiltable angle plate, precision ground base plate rotates 360°, quick and easy adjustment, load capacity: 15 kg.
From €465.89
*
approx. 1-3 workdays
9 x in stock
Fixed Tailstock RSF without height adjustment, for rotary tables, can be used for precise centering in vertical position.
From €654.62
*
approx. 1-3 workdays
1 x in stock
Tailstock for ZENTRA dividing heads and rotary tables, height adjustable, for exact centering in vertical position.
From €157.08
*
approx. 1-3 workdays
3 x in stock
ZENTRA precision rotary table RT with a gear ratio of 90:1 / for milling, drilling, boring, grinding and marking work is horizontally and vertically versatile.
From €311.19
*
approx. 1-3 workdays
Variant available
Precision rotary table dividing head ZENTRA type RT-DF, mounted lathe chuck for milling, drilling, boring, grinding, scribing work, for horizontal and vertical use.
From €784.92
*
approx. 10 weeks
5 x in stock
Stationary 3-jaw chuck NBK for milling, drilling and boring machines, precision ground working surfaces, numbered jaws, flat design.
From €911.18
*
approx. 1-3 workdays
2 x in stock
Stationary three-jaw lathe chuck VMJ with angle drive and double operating option, in flat design for milling and drilling machines.
From €1,062.79
*
approx. 1-3 workdays
2 x in stock
4-jaw lathe chuck, stationary, type MC, for milling, drilling and boring machines, jaw chuck in extremely flat design with limited space.
From €1,016.38
*
approx. 1-3 workdays
2 x in stock
Universal angle collet chuck for ER collets, with standard nut, tool holder as stationary clamping device or holder in lathe chuck.
€1,058.74
*
approx. 1-3 workdays
6 x in stock
ZENTRA Simple indexing spacer incl. lathe chuck, for direct dividing including three-jaw lathe chuck and indexing disks as milling machine accessories ✅ order now!
From €644.86
*
approx. 1-3 workdays
15 x in stock
Zentra Super indexing spacer with handwheel and three-jaw lathe chuck, clamping disk and indexing plates, for horizontal / vertical use as milling machine accessories.
From €890.95
*
approx. 1-3 workdays
2 x in stock
ZENTRA Dividing plates for precision rotary tables type TS for the production of precise, indirect graduations as for example in gear milling ✅ buy now!
From €112.46
*
approx. 1-3 workdays
Subsequent delivery
ZENTRA Indexing fixture incl. three jaw lathe chuck, tailstock, turning and drilling jaws and 2 dividing discs, for direct and indirect dividing.
€1,267.71
*
approx. 10 weeks
12 x in stock
Universal dividing head, ZENTRA, type VUT-2A, incl. tailstock, flange and 2 dividing discs as milling machine accessories for direct and indirect dividing.
€954.38
*
approx. 1-3 workdays
7 x in stock
Centering arbor with morse taper for ZENTRA rotary table adaptor plates for precise alignment and clamping of lathe chucks and chucks.
From €28.44
*
approx. 1-3 workdays
