Technical competent advice
Secure purchase on account
Already over 10.000 satisfied customers
Dispatch within 24h*
 

HSK tool holders DIN 69893

HSK tool holders DIN 69893

The hollow shank taper, also called HSK tool holders DIN 69893, is used on machine tools as an improved further development of the steep taper. Due to the face system on the collar, the changeover accuracy is excellent. All tool holders are precision ground and finely balanced G2.5 / 25,000 rpm.

The hollow shank taper, also called HSK tool holders DIN 69893, is used on machine tools as an improved further development of the steep taper. Due to the face system on the collar, the changeover... read more »
Close window
HSK tool holders DIN 69893

The hollow shank taper, also called HSK tool holders DIN 69893, is used on machine tools as an improved further development of the steep taper. Due to the face system on the collar, the changeover accuracy is excellent. All tool holders are precision ground and finely balanced G2.5 / 25,000 rpm.

No results were found for the filter!
Variant available
Test arbor DIN 69893 / HSK-A
Test arbor DIN 69893 / HSK-A
Test arbors DIN 69893 / HSK-A are suitable for acceptance tests of machine tools in accordance with ISO recommendation R230.
From €322.49 *

approx. 10 weeks

Variant selection
100+ in stock
HSK blank DIN 69893 for boring bars
HSK blank DIN 69893 for boring bars
Boring bar blank HSK-A DIN 69893, collar as well as steep taper hardened and ground, in taper sizes 63 - 100, for the manufacture of special tools.
From €51.94 *

approx. 1-3 workdays

Variant selection
9 x in stock
Drill holder E1 for insert drill HSK-A DIN 69896
Drill holder E1 for insert drill HSK-A DIN 69896
HSK-A drill holders for E1 insert drills, tool holders DIN 69893 are balanced at G6.3 - 15,000 rpm.
From €128.52 *

approx. 1-3 workdays

Variant selection
17 x in stock
Adaptors for morse taper tools with tang HSK-A DIN 69893
Adaptors for morse taper tools with tang HSK-A DIN 69893
Adaptors for morse taper tools with tang HSK-A Tool holders DIN 69893 are G2.5 - 25,000 rpm finely balanced for holding tools with Morse taper
From €77.49 *

approx. 1-3 workdays

Variant selection
6 x in stock
Cutter holder for screw-in milling cutters HSK-A DIN 69893
Cutter holder for screw-in milling cutters HSK-A DIN 69893
Cutter holder for screw-in milling cutters with threaded studs, HSK 63 and HSK 100 DIN 69893 Tool holders as milling machine accessories
From €120.83 *

approx. 1-3 workdays

Variant selection
10 x in stock
Cutter holder for screw-in milling cutters Slimeline HSK-A DIN 69893
Cutter holder for screw-in milling cutters Slimeline HSK-A DIN 69893
Cutter holder for screw-in milling cutters Slimeline HSK-A 63 and HSK 100 DIN 69893 Tool holders in slim design as milling machine accessories.
From €176.12 *

approx. 1-3 workdays

Variant selection
10 x in stock
Cutter holder with cooling channel HSK-A DIN 69893
Cutter holder with cooling channel HSK-A DIN 69893
Cutter holder with cooling channel HSK-A DIN 69893 as milling machine accessories, finely balanced G2.5 - 25,000 rpm for cylindrical shanks DIN 1835-B.
From €82.53 *

approx. 1-3 workdays

Variant selection
32 x in stock
Combi shell mill holder HSK-A DIN 69893
Combi shell mill holder HSK-A DIN 69893
Combi shell mill holderr, HSK-A tool holders DIN 69893 are G2.5 - 25,000 rpm finely balanced, for shell end mills with longitudinal or transverse groove.
From €80.79 *

approx. 1-3 workdays

Variant selection
100+ in stock
Coolant tube HSK-A DIN 69893
Coolant tube HSK-A DIN 69893
Coolant tube HSK-A for tool holders DIN 69893 as coolant transfer units for central coolant transfer for HSK tool holders
From €6.78 *

approx. 1-3 workdays

Variant selection
40 x in stock
Cutter head holder with transverse groove HSK-A DIN 69893
Cutter head holder with transverse groove HSK-A DIN 69893
Cutter head holder with transverse groove HSK-A tool holders DIN 69893 are G2.5 - 25,000 rpm finely balanced for tools with longitudinal or cross-groove.
From €80.79 *

approx. 1-3 workdays

Variant selection
Variant available
Key for coolant transfer unit HSK
Key for coolant transfer unit HSK
Key for HSK coolant tubes as milling machine accessories for mounting the coolant transfer units in HSK tool holders DIN 69893.
From €12.97 *

approx. 10 weeks

Variant selection
4 x in stock
ER Collet chuck HSK-A 63 DIN 69893, MINI
ER Collet chuck HSK-A 63 DIN 69893, MINI
ER collet chuck DIN 69893 with ER mini nut, HSK tool holders G2,5 - 25.000 rpm fine balanced for collets DIN 6499 (ISO 15488).
From €121.62 *

approx. 1-3 workdays

Variant selection
46 x in stock
ER Collet chuck HSK-A 63 DIN 69893
ER Collet chuck HSK-A 63 DIN 69893
ER collet chuck DIN 69893, HSK tool holders G2,5 - 25.000 rpm fine balanced for collets DIN 6499 (ISO 15488) system ER.
From €83.40 *

approx. 1-3 workdays

Variant selection
Variant available
OZ Collet chuck HSK-A DIN 69893
OZ Collet chuck HSK-A DIN 69893
OZ collet chucks DIN 69893, HSK 63 - HSK 100 tool holders G2,5 - 25.000 rpm fine balanced for collets DIN 6388 (ISO 10897).
From €91.21 *

approx. 10 weeks

Variant selection
11 x in stock
Shrink chuck 3° HSK-A DIN 69893
Shrink chuck 3° HSK-A DIN 69893
3° shrink chuck HSK 63 DIN 69893, tool holders are G2.5 - 25,000 rpm finely balanced for tool shanks with straight shank.
From €103.38 *

approx. 1-3 workdays

Variant selection
6 x in stock
Shrink chuck 4,5° HSK-A DIN 69893
Shrink chuck 4,5° HSK-A DIN 69893
Shrink chuck 4,5° DIN 69893 HSK 63 and HSK 100, tool holders are G2,5 - 25.000 rpm fine balanced for tool shanks with straight shank.
From €91.21 *

approx. 1-3 workdays

Variant selection
16 x in stock
End mill adaptor Weldon HSK-A DIN 69893
End mill adaptor Weldon HSK-A DIN 69893
End mill adaptor Weldon shank HSK 63 and HSK 100 DIN 69893, tool holders are G2,5 - 25.000 rpm fine balanced for straight shanks DIN 1835-B.
From €71.23 *

approx. 1-3 workdays

Variant selection
8 x in stock
Cutter holder Whistle Notch, HSK DIN 69893
Cutter holder Whistle Notch, HSK DIN 69893
Cutter holder Whistle Notch, HSK DIN 69893 as milling machine accessory, G2.5 - 25,000 rpm finely balanced for straight shanks DIN 1835-E.
From €80.79 *

approx. 1-3 workdays

Variant selection
Variant available
Adapter sleeve for MK with tightening thread HSK-A DIN 69893
Adapter sleeve for MK with tightening thread HSK-A DIN 69893
Adapter sleeve for MK with tightening thread HSK-A tool holders DIN 69893 are balanced G6.3 - 15,000 rpm for tools with tightening thread.
From €110.31 *

approx. 10 weeks

Variant selection
6 x in stock
Quick-change Tapping chuck HSK-A DIN 69893
Quick-change Tapping chuck HSK-A DIN 69893
Quick-change Tapping chuck HSK-A DIN 69893 with length compensation.
From €303.57 *

approx. 1-3 workdays

Variant selection
29 x in stock
Precision drill chuck HSK-A DIN 69893
Precision drill chuck HSK-A DIN 69893
Precision drill chuck HSK-A DIN 69893, easy operation by means of hexagon key, for clockwise and anti-clockwise rotation.
From €235.76 *

approx. 1-3 workdays

Variant selection
Viewed
Do you have any questions?

Do you have any questions about our collets and precision tools?

You can contact us by telephone, via fax or email.
Tel.: +49 6721 994167
Fax: +49 6721 994169
eMail: first-connect@fwt-gmbh.de