Our top seller products
1 x in stock
1 x in stock
Variant available
8 x in stock
1 x in stock
No results were found for the filter!
1 x in stock
AMF blank for T-slot nuts DIN 508, for the economic production of T-slot nuts with customer-specific thread.
From €1.00 *
approx. 1-3 workdays
1 x in stock
AMF Nuts for T-slots "Rhombus" No. 510 T-slot nut tempered, for additional setting of a clamping point when the fixture is already clamped.
From €4.94 *
approx. 1-3 workdays
1 x in stock
AMF hexagon nut DIN 6330 B as fasteners with spherical end for use with taper sockets DIN 6319 D or for washers.
From €0.45 *
approx. 1-3 workdays
1 x in stock
AMF Quick release nut without collar No. 6332S for easy installation in narrow and invisible places or with long and damaged threaded rods.
From €5.63 *
approx. 1-3 workdays
1 x in stock
AMF washer DIN 6340 made of steel, quenched and tempered, punched and flattened to distribute the clamping force evenly over the screw element.
From €0.56 *
approx. 1-3 workdays
1 x in stock
AMF spherical washer DIN 6319 C made of steel, case-hardened and phosphated for angle compensation up to 3° in conjunction with cone cup DIN 6319 D.
From €0.48 *
approx. 1-3 workdays
1 x in stock
AMF taper cup DIN 6319 D made of steel, case-hardened and phosphated for angle compensation up to 3° in combination with AMF ball washer DIN 6319 C.
From €0.50 *
approx. 1-3 workdays
1 x in stock
AMF taper cup DIN 6319 G made of steel, case-hardened and phosphated for angle compensation up to 3° in combination with AMF ball washer DIN 6319 C.
From €1.17 *
approx. 1-3 workdays
1 x in stock
AMF T-slot nut DIN 508L, extended, tempered with grades 10, screw connection must be made over the entire thread length.
From €4.19 *
approx. 1-3 workdays
8 x in stock
AMF Nuts for T-slots DIN 508, T-nuts tempered with property class 10, screw connection must be made over the entire thread length.
From €1.70 *
approx. 10 weeks
1 x in stock
AMF Studs for nuts and T-slots DIN 6379 hardened, tempered, M6-M12 strength class 10.9, from M14 strength 8.8, rolled thread specially for clamping purposes.
From €0.70 *
approx. 1-3 workdays
1 x in stock
Collar nuts DIN 6331 AMF, 1.5xD high, collar nuts as connecting elements DIN 6331 turned, milled and tempered with strength class 10.
From €2.62 *
approx. 1-3 workdays
1 x in stock
AMF Elongation nuts DIN 6334, 3 x D high, as connecting element between DIN 787 (screw for T-slot) and DIN 6379 (stud bolt).
From €1.54 *
approx. 1-3 workdays
Variant available
AMF Bolts for T-slots DIN 787 complete with hexagon nut DIN 6330B and washer DIN 6340, bolts has rolled thread with strength class stamped.
From €7.50 *
approx. 10 weeks
