Our top seller products
No results were found for the filter!
64 x in stock
Hook spanner DIN 1810A with nose, especially for clamping nuts OZ, made of special steel, hardened and tempered in burnished tone.
From €8.57
*
approx. 1-3 workdays
14 x in stock
Safety socket wrench for tightening bolts for safe tightening, no slipping as with conventional spanners, reduced risk of accidents.
From €29.99
*
approx. 1-3 workdays
Variant available
Key for HSK coolant tubes as milling machine accessories for mounting the coolant transfer units in HSK tool holders DIN 69893.
From €12.19
*
approx. 10 weeks
1 x in stock
Double open ended spanner DIN 3110, jaw position 15° made of chrome vanadium steel nickel plated, chrome plated, satin matt finish, with highly polished heads.
From €2.56
*
approx. 1-3 workdays
1 x in stock
Double open ended spanner set DIN 3110, 8 pieces and 11 pieces, jaw position 15°, chrome vanadium steel, nickel plated, chrome plated and satin finished.
From €31.89
*
approx. 1-3 workdays
1 x in stock
Combination wrench DIN 3113A width across flats 5.5-50mm, ring side offset by 15°, nickel-plated chrome-vanadium steel, chrome-plated and satin finished.
From €2.90
*
approx. 1-3 workdays
1 x in stock
Ring spanner set DIN 3113At, 14-piece and 23-piece, ring side cranked at 15°, made of chrome vanadium steel, nickel-plated, chrome-plated and satin-finished.
From €67.53
*
approx. 1-3 workdays
1 x in stock
Combination wrench set 12 pcs. 1/4-1 inch, ring side and fork position 15° angled, made of chrome vanadium steel, chrome plated and mirror polished.
€102.52
*
approx. 1-3 workdays
1 x in stock
GearTech Ratchet Ring Open-Ended Spanner, metric, without reversible knob, wrench size 6-50mm, chrome vanadium steel chrome plated and mirror polished.
From €12.50
*
approx. 1-3 workdays
1 x in stock
GearTech Ratchet Ring Open-Ended Spanner Set, metric, without reversible knob, 6 - 32 mm, made of chrome vanadium steel chrome plated and mirror polished.
From €65.81
*
approx. 1-3 workdays
1 x in stock
Double ring spanner DIN 3118, metric, open type, SW 8 - 24 mm, heads angled 15°, made of chrome vanadium steel, chrome-plated and satin finished.
From €9.59
*
approx. 1-3 workdays
1 x in stock
Double ring spanner set DIN 3118, metric, open pattern, SW 8 - 24 mm, heads angled 15°, made of chrome vanadium steel, chrome-plated and satin finished.
€65.57
*
approx. 1-3 workdays
1 x in stock
Double ring spanner DIN 838, wrench size 8-41mm, ring sides 75° deep cranked, of chrome vanadium steel nickel plated, chrome plated and satin finished.
From €4.14
*
approx. 1-3 workdays
1 x in stock
Double ring spanner DIN 838 in 8-piece design, ring sides 75° deep cranked, made of chrome vanadium steel nickel plated, chrome plated and satin finished.
€44.33
*
approx. 1-3 workdays
1 x in stock
AMF square ring spanner DIN 248, width across flats 8 - 24 mm, made of special steel, hardened and tempered in a burnished tone. Continuous inner square.
From €22.84
*
approx. 1-3 workdays
1 x in stock
AMF Screwdriver for square drive bolts DIN 905, external square SW 4-14mm, special steel, hardened, tempered in burnished tone. Turning handle is pressed in.
From €14.53
*
approx. 1-3 workdays
1 x in stock
AMF square socket spanner DIN 9044, with internal square SW 4-19mm, special steel, hardened and tempered in burnished tone. Turning handle is pressed in.
From €23.44
*
approx. 1-3 workdays
1 x in stock
AMF triangular socket spanner DIN 22417 size M4 - M16 for triangular screws according to DIN 22424 and for triangular nuts according to DIN 22425
From €3.67
*
approx. 1-3 workdays
1 x in stock
AMF Adjustable pin wrench with pin Ø 1.5 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 | 8.0 | 10.0 mm made of special steel, tempered in burnished tone.
From €7.21
*
approx. 1-3 workdays
Subsequent delivery
AMF Adjustable face spanner set with exchangeable pins Ø 1.5 | 2.0 | 2.5 | 3.0 | 4.0 mm made of special steel, hardened and galvanized, in plastic box.
€37.82
*
approx. 10 weeks
1 x in stock
Hinged pin wrench AMF, adjustable with pin Ø 3.0 - 8.0 mm for two hole nuts, with suspension hole, made of special steel, tempered in burnished tone.
From €13.91
*
approx. 1-3 workdays
1 x in stock
AMF wrench for 2 hole nuts DIN 3116 for flange nuts DIN 44716-D and for clamping cut-off wheels and grinding wheels on angle grinders.
From €5.32
*
approx. 1-3 workdays
1 x in stock
AMF hook wrench with nose DIN 1810 A, with suspension hole, for locknuts DIN 1804 and roller bearing nuts DIN 981.
From €4.07
*
approx. 1-3 workdays
1 x in stock
AMF hook wrenches with pin DIN 1810 B with rounded edges, for capstan nuts DIN 1816 made of special steel, hardened and tempered in burnished tone.
From €4.77
*
approx. 1-3 workdays
1 x in stock
AMF jointed hook wrench with lug for locknuts DIN 1804 and roller bearing nuts DIN 981, in industrial design, optionally steel or stainless steel.
From €13.05
*
approx. 1-3 workdays
1 x in stock
AMF jointed hook wrench with spigot, hook and shank extended, rivet reinforced, for capstan nuts DIN 1816, in industrial design, with hanging hole.
From €15.83
*
approx. 1-3 workdays