Technical competent advice
Secure purchase on account
Already over 10.000 satisfied customers
Dispatch within 24h*
 

Measuring angles with and without stop for all measuring ranges

Measuring angles

Measuring angles metallic as flange angle, die makers square with or without stop, incision square or knife-edge square, mitre angle, acute angle, centre square, universal angle and joiner square with beech wood or pressure casting leg, stand square bevel, mitre square and carpenters square with or without perforations.

Every measuring instrument according to DIN can be calibrated to the applicable standards of VDI/VDE/DGQ2618. Measuring equipment that is produced after factory standard, only can be calibrated to this factory standard. We can deliver our measuring instruments with current calibration certificate.

Measuring angles metallic as flange angle, die makers square with or without stop, incision square or knife-edge square, mitre angle, acute angle, centre square, universal angle and joiner... read more »
Close window
Measuring angles with and without stop for all measuring ranges

Measuring angles metallic as flange angle, die makers square with or without stop, incision square or knife-edge square, mitre angle, acute angle, centre square, universal angle and joiner square with beech wood or pressure casting leg, stand square bevel, mitre square and carpenters square with or without perforations.

Every measuring instrument according to DIN can be calibrated to the applicable standards of VDI/VDE/DGQ2618. Measuring equipment that is produced after factory standard, only can be calibrated to this factory standard. We can deliver our measuring instruments with current calibration certificate.

No results were found for the filter!
100+ in stock
Werkzeuge hergestellt Made in Germany
Steel squares without back, zinc plated, S110
Steel squares without back, zinc plated, S110
Steel squares without back, zinc plated, S110, 100 x 70 - 2000 x 1000 mm, made of carbon steel, for simple straightening and marking work.
From €6.43 *

approx. 1-3 workdays

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Steel squares with back, zinc plated, S111
Steel squares with back, zinc plated, S111
Steel squares with back, zinc plated, S111, 100 x 70 - 2000 x 1000 mm, made of carbon steel, for simple scribing and marking work.
From €8.93 *

approx. 1-3 workdays

Variant selection
Variant available
Werkzeuge hergestellt Made in Germany
Flange steel square F104, zinc plated
Flange steel square F104, zinc plated
Flange steel square F104, zinc plated, manufactured according to works standard, for aligning flanges during plumbing and pipeline construction.
From €18.33 *

approx. 10 weeks

Variant selection
Variant available
Werkzeuge hergestellt Made in Germany
Carpenter's steel square 35mm wide, conical
Carpenter's steel square 35mm wide, conical
Carpenter's steel square 35mm wide, conical, with or without marking holes in cm-division for carpenters/carpenters or a similar wooden building trade.
From €22.49 *

approx. 10 weeks

Variant selection
Variant available
Werkzeuge hergestellt Made in Germany
Carpenter's steel square 35mm wide, galvanized
Carpenter's steel square 35mm wide, galvanized
Carpenter's steel square 35mm wide, galvanized, with or without marking holes in cm-division for carpenters/carpenters or a similar wooden building trade.
From €15.17 *

approx. 10 weeks

Variant selection
70 x in stock
Werkzeuge hergestellt Made in Germany
Carpenter's steel square 35mm wide, polished
Carpenter's steel square 35mm wide, polished
Carpenter's steel square 35mm wide, polished, with or without marking holes in cm-division for carpenter / joiner or a similar wooden building trade.
From €14.28 *

approx. 1-3 workdays

Variant selection
30 x in stock
Werkzeuge hergestellt Made in Germany
Carpenter's steel square 35mm wide, stainless steel
Carpenter's steel square 35mm wide, stainless steel
Carpenter's steel square 35mm wide, made of stainless steel, with or without marking holes in cm-division for carpenter / joiner or similar wooden building trade.
From €15.62 *

approx. 1-3 workdays

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Carpenter's angle 35mm wide, powder coated
Carpenter's angle 35mm wide, powder coated
Carpenter's angle 35mm wide, powder-coated, with or without marking holes in mm-pitch for carpenters/carpenters or a similar woodworking trade.
From €16.07 *

approx. 1-3 workdays

Variant selection
Variant available
Bevel edge square without back, Inox, DIN 875
Bevel edge square without back, Inox, DIN 875
Bevel edge square without back, Inox, DIN 875, with 2 hair measuring edges and completely hardened, grade 00 is suitable for all measuring work.
From €19.16 *

approx. 10 weeks

Variant selection
Subsequent delivery
Knife edge square DIN 875/0, adjustable, with ruler 4 x 4 x 60
Knife edge square DIN 875/0, adjustable, with ruler 4 x 4 x 60
Knife edge square DIN 875/0, adjustable, with ruler 4x4x60, hardened, with 2 knife measuring edges, made of stainless steel for fixture and tool construction.
€116.62 *

approx. 10 weeks

See details
72 x in stock
Bevel edge square with back, Inox, DIN 875
Bevel edge square with back, Inox, DIN 875
Bevel edge square with back, Inox, DIN 875 quality 00, with two bevelled measuring edges, completely hardened, is suitable for all measuring work.
From €39.98 *

approx. 1-3 workdays

Variant selection
1 x in stock
Control square DIN 875/00 without back, black brandes, hardened
Control square DIN 875/00 without back, black brandes, hardened
Flat control square DIN 875/00 with two bevelled edge, hardened, made of tool steel, with edge black branded.
From €18.33 *

approx. 1-3 workdays

Variant selection
7 x in stock
Die maker's square DIN 875/00
Die maker's square DIN 875/00
Die maker's square DIN 875/00, made of stainless steel, matt chrome-plated, with internal measuring edge for jig and tool making.
From €19.16 *

approx. 1-3 workdays

Variant selection
89 x in stock
Precision control square without back, Inox, DIN 875
Precision control square without back, Inox, DIN 875
Precision control square without back, Inox, DIN 875, for all measuring or marking work quality 0 / quality 1 or quality 2.
From €9.38 *

approx. 1-3 workdays

Variant selection
Variant available
Precision control square with back, Inox, DIN 875
Precision control square with back, Inox, DIN 875
Precision control square with back, Inox, DIN 875 quality 0 / quality 1 or quality 2 are suitable for all measuring or marking work.
From €12.95 *

approx. 10 weeks

Variant selection
100+ in stock
Control square without back, carbon steel, DIN 875
Control square without back, carbon steel, DIN 875
Precision control square without back, DIN 875 in grade 1 or grade 2,made of carbon steel, is suitable for all measuring or marking work.
From €9.82 *

approx. 1-3 workdays

Variant selection
100+ in stock
Control square with back, carbon steel, DIN 875
Control square with back, carbon steel, DIN 875
Precision control square with back, DIN 875, made of carbon steel in quality 1 or quality 2, suitable for all measuring or marking work.
From €10.71 *

approx. 1-3 workdays

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Flat angle DIN 875/1 made of hardened aluminium
Flat angle DIN 875/1 made of hardened aluminium
Flat angle DIN 875/1 made of hardened, black coloured aluminium, HRC 63, accuracy according to DIN 875 quality 1, reading with special engraving.
From €9.82 *

approx. 1-3 workdays

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Stop bracket DIN 875/1 made of hardened aluminium
Stop bracket DIN 875/1 made of hardened aluminium
Stop angle DIN 875/1 made of hardened, black coloured aluminium, HRC 63, accuracy according to DIN 875 quality 1, reading with special engraving.
From €11.60 *

approx. 1-3 workdays

Variant selection
79 x in stock
Mitre square with back 135°
Mitre square with back 135°
Mitre square with back 135°, made of special steel, is manufactured according to factory standard and is suitable for measuring or marking work.
From €24.99 *

approx. 1-3 workdays

Variant selection
76 x in stock
Werkzeuge hergestellt Made in Germany
Mitre square 135° without back DIN 875/1, aluminium HRC 63
Mitre square 135° without back DIN 875/1, aluminium HRC 63
Mitre square 135° without back, made of hardened black aluminium, HRC 63, accuracy DIN 875/1, scale special laser-engraving.
From €11.16 *

approx. 1-3 workdays

Variant selection
Variant available
Werkzeuge hergestellt Made in Germany
Mitre square 135° with back, DIN 875/1, aluminium HRC 63
Mitre square 135° with back, DIN 875/1, aluminium HRC 63
Mitre square 135° with stop, to DIN 875/1, made of hardened, black coloured aluminium, HRC 63, accuracy to DIN 875 quality 1.
From €12.50 *

approx. 10 weeks

Variant selection
29 x in stock
Hexagon angles 120°, without stop
Hexagon angles 120°, without stop
Hexagonal angle made of metal 120 degrees, without stop made of high quality special steel, the mitre angle is manufactured according to factory standard.
From €15.17 *

approx. 1-3 workdays

Variant selection
100+ in stock
Octagon angles 135°, without stop
Octagon angles 135°, without stop
Octagonal angles 135 degrees without stop made of high-quality special steel for precise work, the mitre angle is manufactured according to factory standard.
From €17.49 *

approx. 1-3 workdays

Variant selection
100+ in stock
Acute angle square without back 45°
Acute angle square without back 45°
Acute angle square without back 45°, made of high-quality special steel according to factory standard, suitable for all measuring and marking work.
From €19.16 *

approx. 1-3 workdays

Variant selection
16 x in stock
Werkzeuge hergestellt Made in Germany
Acute angle square 45° without back, aluminium HRC 63
Acute angle square 45° without back, aluminium HRC 63
Acute angle square 45° without back, to DIN 875/1, DR20/A, made of hardened, black dyed aluminium, HRC 63, accuracy to DIN 875/1.
From €13.84 *

approx. 1-3 workdays

Variant selection
100+ in stock
Acute angle square with back 45°
Acute angle square with back 45°
Acute angle square with back 45°, measuring angle made of high-quality special steel according to factory standard, suitable for all measuring and marking work.
From €24.99 *

approx. 1-3 workdays

Variant selection
16 x in stock
Werkzeuge hergestellt Made in Germany
Acute angle square 45° with back, DIN 875/1 aluminium HRC 63
Acute angle square 45° with back, DIN 875/1 aluminium HRC 63
Acute angle square 45° with back, to DIN 875/1, made of hardened, black aluminium, HRC 63, scale special laser-engraving, accuracy to DIN 875/1
From €16.96 *

approx. 1-3 workdays

Variant selection
31 x in stock
Multidegrees square with back, type DR27
Multidegrees square with back, type DR27
Multidegrees square with back, type DR27 made of carbon steel, size 100 - 300 mm, angle 30° / 45° / 90° / 120°, manufactured according to factory standard.
From €41.65 *

approx. 1-3 workdays

Variant selection
100+ in stock
Precision center square, with mm-graduation, type RL10
Precision center square, with mm-graduation, type RL10
Precision center square made of tool steel, matt chrome-plated reading, with mm graduation, for centering Ø 90 - 520 mm, error limit 0.3 mm.
From €30.82 *

approx. 1-3 workdays

Variant selection
Variant available
Joiner's adjustable bevel, galvanised
Joiner's adjustable bevel, galvanised
Joiner's adjustable bevel, type S264, made of carbon steel, galvanised in rust-protected design is suitable for carpenters and model makers.
From €11.60 *

approx. 10 weeks

Variant selection
16 x in stock
Werkzeuge hergestellt Made in Germany
Center square, hardened aluminium, with mm graduation, RL11
Center square, hardened aluminium, with mm graduation, RL11
Center square, made of black aluminium, hardened HRC 63, type RL11, mm graduation, works standard.for scribing the center round parts and waves
From €29.16 *

approx. 1-3 workdays

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Joiner's square with shank of beech wood
Joiner's square with shank of beech wood
Joiner's square with shank of beech wood and brass fitting, hardened steel sheet 42 x 1mm with 4 divisions, is suitable for carpenters and model makers.
From €12.50 *

approx. 1-3 workdays

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Joiner's adjustable sliding bevel, type S283
Joiner's adjustable sliding bevel, type S283
Joiner's adjustable sliding bevel, type S283, with brass fittings anddark blue powder-coated blade, suitable for carpenters and model makers.
From €14.28 *

approx. 1-3 workdays

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Joiner's square with cast shank, lightweight design
Joiner's square with cast shank, lightweight design
Joiner's square with cast shank in lightweight design, with mitre, optional mm/inch | one side mm/mm | both sides mm/mm.
From €5.36 *

approx. 1-3 workdays

Variant selection
100+ in stock
Joiner's square with cast shank, heavy design
Joiner's square with cast shank, heavy design
Joiner's square with cast shank, in heavy design with 45° mitre, stainless steel blade 38 x 1 mm, double pitch mm/mm on both sides.
From €14.28 *

approx. 1-3 workdays

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Joiner's square with aluminium handle
Joiner's square with aluminium handle
Joiner's square with aluminium handle, elocated with profile grooves 40 x 12 mm, with 2 mm/mm graduations lasered on both sides .
From €12.50 *

approx. 1-3 workdays

Variant selection
Variant available
Werkzeuge hergestellt Made in Germany
Joiner's adjustable sliding bevel, type 311
Joiner's adjustable sliding bevel, type 311
Joiner's adjustable sliding bevel type 311, anodized aluminium handle, hardened steel blade 250/300 x 29 x 1.6 mm, suitable for carpenters and model makers.
From €13.39 *

approx. 10 weeks

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Mitre square with aluminium blade
Mitre square with aluminium blade
Mitre square with black anodized aluminium handle (HRB70) as mitre angle 45° and 135° angle gauge, for carpenters and model makers.
€14.73 *

approx. 1-3 workdays

See details
Variant available
Werkzeuge hergestellt Made in Germany
Joiner's square with cast shank
Joiner's square with cast shank
Joiner's square with cast shank, angle 45° and 135° angle gauge, for carpenters and model makers, with black varnished bare blade (HRB70)
From €9.38 *

approx. 10 weeks

Variant selection
100+ in stock
Werkzeuge hergestellt Made in Germany
Joiner's square with shank of beech wood
Joiner's square with shank of beech wood
Joiner's square with shank of beech wood, angle 45° and 135° angle, for carpenters and model makers, with brass fittings and steel blade
From €11.60 *

approx. 1-3 workdays

Variant selection
80 x in stock
Werkzeuge hergestellt Made in Germany
Joiner's adjustable sliding bevel with casting shank
Joiner's adjustable sliding bevel with casting shank
Joiner's adjustable sliding bevel with casting shank, with thumb screw, is suitable for carpenters and model makers.
From €6.55 *

approx. 1-3 workdays

Variant selection
Subsequent delivery
Adjustable sliding bevel square with casting shank and thumb screw, 200mm
Adjustable sliding bevel square with casting shank and thumb screw, 200mm
Adjustable sliding bevel square 200mm with casting shank and thumb screw, for wood workers, joiners and model makers.
€44.15 *

approx. 10 weeks

See details
100+ in stock
Combination angle with spirit level, 300mm
Combination angle with spirit level, 300mm
Combination angle with spirit level with nickel-plated rail 300 mm and cm/inch graduation on both sides.
€9.38 *

approx. 1-3 workdays

See details
100+ in stock
Combinations squares with spirit level, 300mm
Combinations squares with spirit level, 300mm
Combinations squares with spirit level and bevel protractor, measuring range 300 mm, scriber and blade nickel plated, with cm/inch graduation.
€51.65 *

approx. 1-3 workdays

See details
100+ in stock
Werkzeuge hergestellt Made in Germany
Joiner's adjustable sliding bevel with casting shank
Joiner's adjustable sliding bevel with casting shank
Joiner's adjustable sliding bevel with casting shank, with round plastic nut and black painted bevel, is suitable for carpenters and model makers.
From €10.12 *

approx. 1-3 workdays

Variant selection
Variant available
Precision granite square 90°, DIN 875/0
Precision granite square 90°, DIN 875/0
Precision granite square, accuracy DIN 875/0 for checking the squareness of machine spindles or workpieces.
From €93.30 *

approx. 10 weeks

Variant selection
Viewed
Do you have any questions?

Do you have any questions about our collets and precision tools?

You can contact us by telephone, via fax or email.
Tel.: +49 6721 994167
Fax: +49 6721 994169
eMail: first-connect@fwt-gmbh.de